Asrock S754 k8nf4g

[Mussels]

^ In agreeance with radiohead, everest is mostly accurate but my CPU temps can vary widly sometimes.

Not sure if its that accurate, 32C load on stock cooling for sempron 64 2800+ seems a bit low.

[Radiohead57]

If you are running at stock speeds and voltages the 32C may not be far off the mark. As mentioned earlier the board tends to overvolt most settings. I'm not sure if this can be attributed to proper CPU recognition or simply a bug in the bios but my machine is rock solid currently with the mild overclock.

[vaioman]

What chipset temp range would you deem acceptable???

Had my 3000+ Newc folding for a few days at 220 x 10 with bios vcore lowered to 1.45v to counter the overvolting.

Under load it reads about 1.5v.

Tried the Everest demo for voltage readings and of course the one I want is unavailable in demo mode

Gonna try 230 x 10 now and see if I get rig soup or not.

edit: Via Speedfan Temp 2 and Temp 3 readings are pretty much the same and pretty much rise and fall together.

So either it thinks I have 2 cpu's or one is the chipset temp.........and it's too high.
Now test folding at 230 x 10 and got temp 2/41c......temp 3/39c.
Still at 1.45v in bios........will probably need to either increase vcore or use a divider with the el cheapo Crucial ram......but seeing how she goes as is first.

Interesting though because my Ut nforce 3 wasn't happy with this Newc at 2.3+ so this cheap board looks promising.

[vaioman]

Bleugh..........rebooted itself after half an hour..back to the testing

[uddarts]

well if you have to settle for 227 x 10, i won't tell.



ud

[Mussels]

the dual temps are most likelyt because there is space for two sensors. Everest has 'CPU diode' and 'CPU sensor' temps, although i'm not sure which ones the right one atm (Since the systems are at work)

[vaioman]