|
Login to view full posting options
|
| Author |
Message |
Google
AdSense
|
|
| Back to top |
|
 |
ZzBloopzZ
nLightened
Joined: 23 Mar 2003
Posts: 106
Location: Maryland
|
 Posted: Sat Dec 01, 2007 8:28 am Post subject: [Solved] A7N8X Deluxe v2 - SATA II Issues! |
|
|
|
Today I upgraded my file server, everything works perfectly until I plugged up the SATA hard drives using the onboard Sil controller. When I boot up the PC it just freezes at the Sil bios screen where it displays the HDD's connected, which shows only one hard drive out of two and says I can press F4 to do raid settings. However, even if I wait a few minutes or press F4/Ctrl+S it just stays there frozen. But if I hit ctrl + alt + del it reboots. So then I tried flashing to the latest 1008 bios but same damn thing. Any other suggestions?
Specs:
Asus A7N8X Deluxe v2 (1008 offical bios)
Athlon XP 2500+ Barton
Corsair 256mb PC3200 LL
WD 10GB IDE (OS boot drive)
2x WD 750GB SATA (Using onboard SATA... non raided)
I have many more drives but those are all IDE and disconnected for now until I can get the board to work with the SATA drives. I'm not even trying to use RAID. This thing is blowing my mind. I have also disabled many things in bios that I won't need like onboard audio, firewire, printer port, gaming port, floppy etc.
Last edited by ZzBloopzZ on Mon Dec 03, 2007 3:48 am; edited 1 time in total |
|
| Back to top |
|
|
onepairofpant
--?-?-?--
Ultra nForced
Joined: 27 Jan 2003
Posts: 2836
|
| Posted: Sat Dec 01, 2007 5:30 pm Post subject: |
|
|
|
is the jumpers on the hard drive properly set?
I had a problem with a WD IDE drive once where I had to set it to master instead of auto to get it to boot |
|
| Back to top |
|
|
ZzBloopzZ
nLightened
Joined: 23 Mar 2003
Posts: 106
Location: Maryland
|
| Posted: Sat Dec 01, 2007 8:41 pm Post subject: |
|
|
|
| onepairofpant wrote: |
is the jumpers on the hard drive properly set?
I had a problem with a WD IDE drive once where I had to set it to master instead of auto to get it to boot |
Jumper on IDE is single mode. Don't think the SATA drives even have jumper settings. |
|
| Back to top |
|
|
onepairofpant
--?-?-?--
Ultra nForced
Joined: 27 Jan 2003
Posts: 2836
|
| Posted: Sat Dec 01, 2007 9:00 pm Post subject: |
|
|
|
| ZzBloopzZ wrote: |
| onepairofpant wrote: |
is the jumpers on the hard drive properly set?
I had a problem with a WD IDE drive once where I had to set it to master instead of auto to get it to boot |
Jumper on IDE is single mode. Don't think the SATA drives even have jumper settings. |
try messing with the jumper on the IDE drive or detaching the IDE drive completely |
|
| Back to top |
|
|
ZzBloopzZ
nLightened
Joined: 23 Mar 2003
Posts: 106
Location: Maryland
|
| Posted: Sat Dec 01, 2007 9:28 pm Post subject: |
|
|
|
I now have all drives including the boot drive disconnected except for ONE WD SATA 750GB HDD. It still just freezes after displaying the attached drive on the Sil bios screen. I cannot hit F4 or Ctrl + S.
I tried reflashing to 1008 and resetting the cmos the proper way. Still no luck. Everything works flawless with this machine until I tried to get the SATA to work.
I've also tried messing around with the SATA jumpers but no go. Whole reason for this upgrade was to get SATA supported on the file server. :c( As a last resort I'm going to try bios 1008 w/ the latest SATA bios using the cbrom method.
Any other suggestions folks? Sadly I don't have any other SATA HDD's to test this with. Not sure if the SATA bios does not support 750GB+ drives or if it's just picky with WD drives. I've spent about 6 hours reading thru old posts but still no luck. |
|
| Back to top |
|
|
onepairofpant
--?-?-?--
Ultra nForced
Joined: 27 Jan 2003
Posts: 2836
|
| Posted: Sat Dec 01, 2007 9:32 pm Post subject: |
|
|
|
| ZzBloopzZ wrote: |
I've also tried messing around with the SATA jumpers but no go. Whole reason for this upgrade was to get SATA supported on the file server. :c( As a last resort I'm going to try bios 1008 w/ the latest SATA bios using the cbrom method.
|
yea, do that
Last edited by onepairofpant on Sat Dec 01, 2007 9:32 pm; edited 1 time in total |
|
| Back to top |
|
|
mydian
nForce Padawan
Joined: 25 Apr 2004
Posts: 903
Location: Chicagoland
|
| Posted: Sun Dec 02, 2007 2:46 am Post subject: |
|
|
|
| When running 1 Western Digital IDE drive you need to have no jumpers at all on it. When you set the jumper to master it will be looking for a slave. Are the sata drives sata-2? If so you'll need to put a jumper on them to set them to Sata-150. Otherwise as you said maybe the board doesn't support drives that big. |
|
| Back to top |
|
|
ZzBloopzZ
nLightened
Joined: 23 Mar 2003
Posts: 106
Location: Maryland
|
| Posted: Sun Dec 02, 2007 8:47 am Post subject: |
|
|
|
| mydian wrote: |
| When running 1 Western Digital IDE drive you need to have no jumpers at all on it. When you set the jumper to master it will be looking for a slave. Are the sata drives sata-2? If so you'll need to put a jumper on them to set them to Sata-150. Otherwise as you said maybe the board doesn't support drives that big. |
Yes, the HDD is SATA 2. Had no idea you could change WD SATA drives to SATA 1 via jumper. Let me check WD's site to see how to do it... thanks!
Edit: I tried jumper via http://support.wdc.com/images/kb/sataopt1on.gif ... once again only the WD 750GB SATA HDD was connected to the onboard. Just wanted to see if it get's passed the Sil bios screen. But still gets stuck. Going to try updating bios slipstreamed with latest SATA bios and pray if that works.
Thanks so much for the feedback so far guys... now I remember why I sold this board when I had it many years ago before but I think I had rev 1.06.
Last edited by ZzBloopzZ on Sun Dec 02, 2007 8:59 am; edited 1 time in total |
|
| Back to top |
|
|
ZzBloopzZ
nLightened
Joined: 23 Mar 2003
Posts: 106
Location: Maryland
|
| Posted: Mon Dec 03, 2007 3:47 am Post subject: |
|
|
|
FIXED IT!!! Modded latest v1008 bios with the latest SiL 3112A bios v4.2.83, using cbrom. Works GREAT now!
Thanks everyone for your support. You guys rock!
Last edited by ZzBloopzZ on Mon Dec 03, 2007 3:48 am; edited 1 time in total |
|
| Back to top |
|
|
mydian
nForce Padawan
Joined: 25 Apr 2004
Posts: 903
Location: Chicagoland
|
| Posted: Thu Dec 06, 2007 4:56 am Post subject: |
|
|
|
| ZzBloopzZ wrote: |
FIXED IT!!! Modded latest v1008 bios with the latest SiL 3112A bios v4.2.83, using cbrom. Works GREAT now!
Thanks everyone for your support. You guys rock! |
Excellent! Glad you got it work..  |
|
| Back to top |
|
|
Google
AdSense
|
|
| Back to top |
|
|
|
|
nForcersHQ supporters: Impar, wardog, MiniMax, envoid, jasonh, Krips, VAIOMAN, Zetro, sensai, me&er, RElliott, ScottRempel, JHogarth, IcemanIX, Etraman, KA, Tabajara, Xiomberg, ruddywarrior, hookahmike, MMoore, RHodgson, RGilson, powerarmour, Sepal, RRavat, DigitalRuin, HammerheadTech, Bane, DHunt, Fat Jez, baikal, Jumpin' Jon, MGadzikowski, JBishop, RDeBok, JDavies, HDHyland, TMorris
|
|
| |
