how are your nforce/nforce2 rigs?

[zigonneux]

My rigs:

Asus NForce 2 Deluxe, with Athlon 3000+ FSB 333 Mhz
2 x 1 gig memory dual channel
2 HDD's IDE, 200 and 320 gigs
2 HDD'S SATA, 300 and 320 gigs
1 Asus DVD UDMA
1 NEC 3550A burner
1 AGP 8x EVGA 7800GS working great for all games; this one is a replacement of my ATI X800XT All-in-Wonder. Bad drivers support for AGP from ATI was the cause of the change.
1 Samsung analog monitor 19"
1 Power Supply Corsair TX 650 watts
3 fans 120 mm on cases
Windows XP Pro SP2

And everything is running perfectly stable. Really happy with it.

[skinnie]

Well after some trades,I have got an almost new dfi lpb,there is no comparison between it and the an7..dfi rocks
By now I have a quadro 4 980xgl for replacement as my 6800gt is being hardmodded to Quadro FX4000
I love this system

[buddhafest]

So I just picked up this Abit board for dirt cheap and swapped out my A7N8X-E Deluxe board.

The NF7-S 2.0 is a KRAZY board, im running my 2500+ Barton mobile @ 2.3ghz using a 230FSB x 10.0 setting with 1.65vcore and the system is rock solid.

I benched with the following programs for stability:
1. SuperPi Mod @ 32M
2. OCCT for 1hour
3. Currently using P95 and last i checked it was still running at the 11 hour mark. Will check again when I get home tonight from work. If it's stable after 12+ hours I'll be happy. If it's stable after 24 hours, than I know this system is a rock.

I wish I went with this board from the beginning, I had originally ran two Asus A7N8X-E Deluxe boards for years but now switched both of them to Abit NF7-S 2.0. I guess better late than never.

[skinnie]

So I just picked up this Abit board for dirt cheap and swapped out my A7N8X-E Deluxe board.

The NF7-S 2.0 is a KRAZY board, im running my 2500+ Barton mobile @ 2.3ghz using a 230FSB x 10.0 setting with 1.65vcore and the system is rock solid.

I benched with the following programs for stability:
1. SuperPi Mod @ 32M
2. OCCT for 1hour
3. Currently using P95 and last i checked it was still running at the 11 hour mark. Will check again when I get home tonight from work. If it's stable after 12+ hours I'll be happy. If it's stable after 24 hours, than I know this system is a rock.

I wish I went with this board from the beginning, I had originally ran two Asus A7N8X-E Deluxe boards for years but now switched both of them to Abit NF7-S 2.0. I guess better late than never.

The nf7-s is a much more "overclocker board" than the a7n8x-E deluxe...although this one is a very good board too,but more for stability and lower clocks.
As news for my system,this weekend I will sell the mushkin 2x512 redlien kit and get a 2x1Gb Crutcial Ballistix PC4000 kit

[Syfi]

Still My Main Rig.....(see sig)
Settings were never changed and the system has been rock solid for YEARS!!!

[skinnie]

Syfi why do you need a booster when you got the xblk?
Those are gr8 mems...I had a piar of those..gave about 256mhz in my dfi

[turbojo]

This has been my comp for about 6 years, new bits go in now and then:

Asus A7N8X-E Deluxe
Athlon xp 3200+ running 210x12.5=2.63ghz @ 1.85v xspc delta v3 water block
Corsair value select pc3200 2x1gb running 210@ 1.8v 2-2-2-4 with asaka heatsinks
ati hd3850 graphics running gpu 720 mem 940 agp 77mhz with xspc water cooler
nbridge chipset running 1.8v with asaka fan
Hyper 580w psu with 120mm fan
wd velociraptor 150gb hhd x2 running raid 0
2x ide dvd dl super-multi's
2x120mm asaka through 240x120x60 water rad, 1x120mm asaka rear case fan.
vista home premium sp2 32bit
wei: 4.0, 4.5, 5.9, 5.9, 5.9

[caleb59]

Abit NF7 v2.0 + original newest Abit BIOS
AMD Athlon XP 3200+ (2.333MHz) without OC (14x166MHz) + Scythe S-FLEX 2800 rpm (80mm x 80mm - 40 CFM) on radiator from Cooler Master JET7
1x1GB DDR (333MHz) RAM A-DATA (2.5-3-3-7) Synchro Dual Channel
1x1GB DDR (333MHz) RAM Kingmax (2.5-3-3-7) Synchro Dual Channel
1x1GB DDR (333MHz) RAM Kingston (2.5-3-3-7) Synchro Dual Channel
Pine XFX GeForce 7600GT 256MB GDDR3 AGP x8 without OC (580MHz/750MHz) + Zalman VF-700-Cu
1x WD 250GB 8MB 7200 rpm IDE ATA
1x WD 250GB 8MB 7200 rpm IDE ATA
Sound Blaster Live! (CT4830) PCI
Fortron ATX-400PNF (400W)
Asus DRW-1814-BL x16
Asus CD-S520/A x52
Standard floppy drive
Windows XP Pro SP3 PL

[athlonhead]

My Nforce2 computer is now over four years old and still running with the original operating system.
The classic A7N8X //XP2600 Mobil clocked to 3200 specs 2.2 gigs at 400 fsb --1500MB memory

It is still fast as ever. The OS is not bogged down with garbage like others say theirs is.
I use it as my work computer.

Socket A is not dead!

[turbojo]

Now ditched the asus nf2. gone to i7......